Available subject to prior sales · Ajman warehouse
Ammonium Hydroxide Supplier & Distributor in UAE
Industrial grade ammonia solution (aqua ammonia) in sealed 215 kg drums for water treatment, textiles, rubber latex and chemical manufacturing. From a single drum to regular contract supply, with COA and SDS on request.
Where to buy ammonium hydroxide in the UAE: Hazchem Chemicals LLC (Jurf-2, Ajman) supplies industrial grade Ammonium Hydroxide 25% (ammonia solution, aqua ammonia, NH₄OH, CAS 1336-21-6, UN 2672) in 215 kg drums from its Ajman stock, from a single drum to multi-drum contract supply. Delivery covers all seven emirates, with export to Saudi Arabia, Oman, Qatar, Kuwait and Bahrain. COA and SDS are available on request. Quotes: info@hazchem.ae · +971 6 520 5127.
⚠️
Danger: Class 8 corrosive (UN 2672). Causes severe skin burns and eye damage; vapour is harmful if inhaled. Handle with PPE and never mix with bleach or chlorine products. See site readiness and request the SDS before delivery.
Choose How You Buy
Ammonium hydroxide is supplied in 215 kg drums. Pick the order size that matches your consumption and we'll quote on it.
Set up scheduled drum deliveries matched to your consumption, instead of buying spot each time stock runs low. Volume pricing and agreed payment terms for contract buyers.
Technical guide · Prepared by the Hazchem Chemicals technical team · Last reviewed
What Is Ammonium Hydroxide?
Ammonium hydroxide is ammonia gas (NH₃) dissolved in water, written NH₄OH or NH₃(aq). Also called ammonia solution, aqua ammonia or ammonia water, it is a colourless, strongly alkaline liquid with a sharp ammonia smell. Industrial ammonium hydroxide is usually sold at 25% NH₃ and is used in water treatment, textiles, rubber latex, metal finishing, fertilisers and chemical manufacturing.
Formula
NH₄OH (NH₃ dissolved in water)
CAS number
1336-21-6
Typical strength
25% NH₃ by weight, about 227 g of NH₃ per litre
Density (25%)
About 0.91 g/cm³ at 20 °C, lighter than water
Boiling point (25%)
About 38 °C: ammonia gas starts coming out of solution at temperatures common in UAE summers
pH
Strongly alkaline, around pH 11–12 even when diluted
Hazard
Causes severe skin burns and eye damage (GHS H314); vapour irritates the airways (H335); toxic to aquatic life
Transport
UN 2672, Class 8, Packing Group III
How Ammonium Hydroxide Is Made
Ammonia is produced from nitrogen in the air and hydrogen (usually from natural gas) in the Haber–Bosch process. Ammonium hydroxide is made by absorbing that ammonia gas into purified water until the solution reaches the required strength, typically 25%.
N₂ + 3 H₂ → 2 NH₃ · NH₃ + H₂O ⇌ NH₄⁺ + OH⁻
The second reaction is reversible, which is why ammonium hydroxide always smells of ammonia: some of the ammonia stays as a dissolved gas and escapes from the liquid, faster as it warms.
How to Dilute Ammonium Hydroxide 25%
Most processes use ammonia at a lower strength than 25%. To make a weaker solution by weight:
kg of 25% solution = kg of final solution × target % ÷ 25
Worked example: to make 100 kg of 5% ammonia solution, use 100 × 5 ÷ 25 = 20 kg of 25% ammonium hydroxide and 80 kg of water.
Add the ammonium hydroxide to the water, not the other way round, in a well-ventilated area, using cool water. Wear goggles, chemical gloves and respiratory protection rated for ammonia. Check the actual strength on your batch COA, since it can fall slightly once a drum has been opened.
Why Heat Matters for Ammonium Hydroxide in the UAE
Drums build pressure: 25% ammonia solution starts to boil at about 38 °C, so a drum left in the sun releases ammonia gas inside and can bulge.
Open drums cool: let drums cool in the shade before opening, open slowly, point the bung away from people, and wear eye and respiratory protection.
Strength falls when open: ammonia escapes from open or poorly sealed containers, lowering the concentration and filling the area with vapour.
Store shaded and ventilated: keep drums out of direct sun, in a cool, ventilated area, sealed between uses.
Never mix with bleach: ammonia and sodium hypochlorite or chlorine form toxic chloramine gas.
Key Terms
Aqua ammonia
Another name for ammonium hydroxide, common in water treatment and fertiliser use.
Anhydrous ammonia
Pure ammonia with no water, stored as a liquid under pressure. Ammonium hydroxide is the water-based solution.
NH₃ content
The percentage of ammonia by weight in the solution; industrial grade is typically 25%.
Chloramination
Adding ammonia to chlorinated drinking water to form chloramine, a longer-lasting disinfectant residual.
By weight: kg of 25% solution = kg of final solution × target % ÷ 25. For example, 100 kg of 5% solution needs 20 kg of 25% ammonium hydroxide and 80 kg of water. Add the ammonia to cool water in a ventilated area, with goggles, gloves and an ammonia-rated respirator. See the dilution guide.
25% ammonia solution starts to boil at about 38 °C, so in UAE summer heat ammonia gas comes out of the liquid and pressurises the drum. Store drums shaded and ventilated, let them cool before opening, and open slowly with the bung pointed away from people. See heat and storage.
No. Ammonia mixed with bleach (sodium hypochlorite) or chlorine releases toxic chloramine gas. Keep them apart in storage and never use them together in cleaning.
Hazchem Chemicals LLC (Jurf-2, Ajman) supplies industrial grade ammonium hydroxide 25% in 215 kg drums from our Ajman stock, with delivery to all seven emirates and export to the GCC. Request a quote or call +971 6 520 5127.
We supply from a single 215 kg drum upward. Multi-drum and contract orders are available for regular users, and repacking into smaller quantities can be arranged on request.
Price depends on the number of drums, delivery location and whether you buy spot or on a supply contract. Send your requirement and we'll quote per drum or per kg.
Ammonium hydroxide is ammonia gas (NH₃) dissolved in water: the liquid solution form of ammonia, also called aqua ammonia or ammonia solution. Anhydrous ammonia is pure ammonia with no water, stored under pressure. Ammonium hydroxide is handled in sealed drums at normal pressure, which is simpler for most industrial buyers.
pH correction and chloramine disinfection in water treatment; dyeing and scouring in textiles; stabilising natural rubber latex; surface treatment in metal finishing and electroplating; a nitrogen source for fertilisers; and as a reagent in chemical manufacturing and cleaning products. See applications.
Yes. A Certificate of Analysis (COA) and Safety Data Sheet (SDS/MSDS) are available on request, including before you order, for site and HSE approval.
Yes. It is a Class 8 corrosive (UN 2672) that causes severe skin burns and eye damage, and its vapour is harmful if inhaled. Store sealed drums in a cool, shaded, well-ventilated area away from acids, oxidisers and copper, brass or zinc. Never mix it with bleach or chlorine products, which releases toxic chloramine gas. Wear chemical gloves, goggles or a face shield and respiratory protection when decanting.
Yes. Select "Sample for evaluation" in the quote form or email info@hazchem.ae and we'll arrange it.
Yes. We supply all UAE emirates and export to Saudi Arabia, Oman, Qatar, Kuwait and Bahrain. Export shipments are scheduled when the order is confirmed. Contact info@hazchem.ae for export pricing and logistics.
Ready to order ammonium hydroxide 25%? Send your drum quantity and delivery location. We'll come back with price and dispatch date.